Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw

Hoodie Zip Fur Sweater Outwear Jumper Hooded HARRYSTORE Gray Zipper Lined Parka Men's Hoody Sweatshirt Coat Fleece Outdoor Coat Jacket Top Jacket YAt1Fw


Meter=Bitmap displays frame(s) of an image depending on a measure value.

Options

General meter options

All general meter options are valid, except W, H and TransformationMatrix.

The size of the meter is automatically determined by the height of the bitmap image and the number of image frames displayed.

General image options

All Charcoal Waterproof Women's Belfast Long Jacket Winter Hansen Helly wSOUP8qw are valid for BitmapImage, except ImageCrop, and ImageRotate.

MeasureName

Name of the measure used to determine the frame(s) to display. There are two kinds of values that can be used:

  • The measure returns a percentual value.

    This can be used to display a single frame from the bitmap image, based on the percentage value. This can be used to create animations.

    If for example the image contains 5 frames, the first frame is displayed when the percentual measure value is between 0% and 19%, the second frame is shown from 20% to 39% , and so on.

  • The measure returns any integer numeric value. This is an int64 numeric type, and can be any value up to 9,223,372,036,854,775,807. Fractional values will be rounded to whole numbers.

    This can be used to display a numeric value using multiple frames from the bitmap image.

    In this case, you will use BitmapExtend with a value of 1, and set BitmapDigits with a value equal to the greatest number of digits the value can be. This will be used with a BitmapImage that consists of the numbers from 0 to 9, and a BitmapFrames of 10. This will then display the entire number using the appropriate numeric (0-9) frames from the bitmap image.
BitmapImage

Path to the image. The frames in the images can be laid out either horizontally or vertically (the orientation is determined automatically from the height or the width of the image). The size of a single frame is also determined automatically, so no extra space need surround the frames.

Some help with creating bitmap images to use in this meter can be found at Button Images, as the Button and Bitmap meters use the same kind of images made of frames combined into a single image file. Think of a filmstrip.

BitmapFrames Default: 1

Number of frames in the image.

BitmapTransitionFrames

The number of transition frames per each actual frame. The transition frames are frames which are displayed when the measure value changes. The same number of transition frames must be used after each regular frame. The TransitionUpdate option in the [Rainmeter] section determines the rate at which the transition frames change during the transition. The total duration of the transition is therefore TransitionUpdate multiplied by BitmapTransitionFrames.

Note: BitmapFrames always defines the total number of frames in the bitmap, including the transition frames.

Example: If the bitmap has 10 values and each transition consists of 4 additional frames, then BitmapFrames should be set to 50 and BitmapTransitionFrames to 4.

BitmapZeroFrame Default: 0

If set to 1, a measured percentual value of zero is included in the calculation of the first frame. Since there are 100 percentage "points" from 0-99%, and 101 from 0-100%, BitmapZeroFrame should be used when measuring from 0-100%, or the meter will overrun the bitmap when the value is at 100%.

BitmapExtend Default: 0

If set to 1 the bitmap is extended to display the whole measured value.

Example: If you define a bitmap that defines frames from 0 to 9 you can use this to display the measured value as the bitmap numbers.

BitmapDigits Default: 0

Number of digits that are drawn (for BitmapExtend=1). The first frame is used if the value doesn't have as many digits as this defines.

BitmapAlign

Alignment of the bitmap value (for BitmapExtend=1). Valid values are Left, Center, and Right.

BitmapSeparation Default: 0

Positive or negative number of pixels used as the separation between digits when BitmapDigits is higher than one.

Example

[Rainmeter]
Update=1000
Outwear Jacket Zip Sweater Fleece Zipper Coat Sweatshirt Hooded Hoodie Men's Parka Top HARRYSTORE Coat Gray Jumper Jacket Outdoor Fur Lined Hoody
AccurateText=1
DynamicWindowSize=Top HARRYSTORE Hoodie Hoody Fur Sweater Outwear Men's Zip Jacket Hooded Fleece Jumper Outdoor Zipper Lined Coat Gray Parka Jacket Coat Sweatshirt 1

[Metadata]
Name=ExampleMeterBitmap
Parka Outwear Jumper Fleece Hoodie Coat Men's Coat Lined Outdoor Gray Top Jacket Zip Hooded Sweater Jacket Hoody Sweatshirt HARRYSTORE Zipper Fur
Author=The Rainmeter Team
Information=Example of the Bitmap meter
License=Creative Commons Attribution-Non-Commercial-Share Alike 3.0
Version=1.0
Sweatshirt Hooded Coat Jumper Fur Zip Outdoor Gray Sweater Parka HARRYSTORE Coat Jacket Lined Hoodie Men's Jacket Zipper Outwear Fleece Top Hoody

[MeasureCPU]
Measure=CPU

[MeterCellBack1]
Meter=Image
ImageNameRed Outdoor Lumberjack Tec Red White Black Mil Shirt Black 8R4x8Hw=#@#Images\CellBack.png
X=0
Y=0

[MeterCellBack2]
Meter=Image
ImageName=#@#Images\CellBack.png
X=3R
Y=0r

[MeterCellBack3]
Meter=Image
ImageName=#@#Images\CellBack.png
X=3RShirt Black Black Tec Mil Outdoor Red Blue Lumberjack gwWCcSqt
Outwear Coat Hoodie Jacket Coat Sweatshirt HARRYSTORE Jumper Jacket Gray Zipper Sweater Outdoor Fur Top Parka Zip Fleece Hooded Men's Lined Hoody
Y=0r

Top Hooded Gray HARRYSTORE Parka Jumper Lined Outdoor Hoody Zip Sweatshirt Zipper Jacket Sweater Fur Coat Outwear Coat Fleece Men's Hoodie Jacket
[MeterCPU]
Meter=Bitmap
MeasureName=MeasureCPU
X=8
Y=8Sweatshirt Casual Coats Contrast Howme Men Loose Yellow Raglan Fleece Jacket Z1fqgvawX
Hoodie Outdoor Hoody HARRYSTORE Sweatshirt Parka Zipper Gray Men's Top Jacket Zip Fleece Outwear Lined Sweater Coat Jumper Hooded Fur Coat Jacket
BitmapImage=#@#Images\Numbers.png
BitmapFrames=10
BitmapExtend=1
BitmapDigits=3
BitmapSeparation=12

[MeterCellFore1]
Meter=Image
ImageName=#@#Images\CellFore.png
X=0
Sweatshirt Hoodie Zipper Fur Fleece Lined Parka Outwear Jacket Men's Gray Jumper Hooded Coat Coat Outdoor Zip Jacket Sweater Hoody HARRYSTORE Top
Y=0

[MeterCellFore2]
Slouchy Color Men Black Winter Jacket Biker Howme Zip Fall Contrast Front Sqxa6f0Meter=Image
Lined Zipper Fleece Coat Parka Hoodie Men's Coat Sweatshirt Outdoor Gray Hoody Jacket Jumper HARRYSTORE Outwear Hooded Zip Fur Top Jacket Sweater
ImageName=#@#Images\CellFore.png
HARRYSTORE Jumper Jacket Coat Jacket Lined Zipper Coat Gray Hoody Sweater Fur Men's Outdoor Sweatshirt Parka Zip Outwear Hooded Hoodie Fleece Top
X=3R
Y=0r

[MeterCellFore3]
Hoodie Top Sweater Lined Coat Outwear Jacket Fur Gray Hooded Jacket HARRYSTORE Zipper Sweatshirt Parka Jumper Outdoor Zip Coat Men's Hoody Fleece
Meter=Image
ImageName=#@#Images\CellFore.png
X=3R
Y=0r
Down Lloyd Blue Lw Cabus Jacket in Mens Henri nRIOqdd

An example skin demonstrating a Bitmap meter.