Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq

Long Jumpers Mens Knitted Open Gray Cardigan Front Coat Cardigan Outwear Knitted Fit Trench HARRYSTORE Slim Sleeve Knitwear Shirt Long Bq8xRwq


Meter=Bitmap displays frame(s) of an image depending on a measure value.

Options

General meter options

All general meter options are valid, except W, H and TransformationMatrix.

The size of the meter is automatically determined by the height of the bitmap image and the number of image frames displayed.

General image options

All Charcoal Waterproof Women's Belfast Long Jacket Winter Hansen Helly wSOUP8qw are valid for BitmapImage, except ImageCrop, and ImageRotate.

MeasureName

Name of the measure used to determine the frame(s) to display. There are two kinds of values that can be used:

  • The measure returns a percentual value.

    This can be used to display a single frame from the bitmap image, based on the percentage value. This can be used to create animations.

    If for example the image contains 5 frames, the first frame is displayed when the percentual measure value is between 0% and 19%, the second frame is shown from 20% to 39% , and so on.

  • The measure returns any integer numeric value. This is an int64 numeric type, and can be any value up to 9,223,372,036,854,775,807. Fractional values will be rounded to whole numbers.

    This can be used to display a numeric value using multiple frames from the bitmap image.

    In this case, you will use BitmapExtend with a value of 1, and set BitmapDigits with a value equal to the greatest number of digits the value can be. This will be used with a BitmapImage that consists of the numbers from 0 to 9, and a BitmapFrames of 10. This will then display the entire number using the appropriate numeric (0-9) frames from the bitmap image.
BitmapImage

Path to the image. The frames in the images can be laid out either horizontally or vertically (the orientation is determined automatically from the height or the width of the image). The size of a single frame is also determined automatically, so no extra space need surround the frames.

Some help with creating bitmap images to use in this meter can be found at Button Images, as the Button and Bitmap meters use the same kind of images made of frames combined into a single image file. Think of a filmstrip.

BitmapFrames Default: 1

Number of frames in the image.

BitmapTransitionFrames

The number of transition frames per each actual frame. The transition frames are frames which are displayed when the measure value changes. The same number of transition frames must be used after each regular frame. The TransitionUpdate option in the [Rainmeter] section determines the rate at which the transition frames change during the transition. The total duration of the transition is therefore TransitionUpdate multiplied by BitmapTransitionFrames.

Note: BitmapFrames always defines the total number of frames in the bitmap, including the transition frames.

Example: If the bitmap has 10 values and each transition consists of 4 additional frames, then BitmapFrames should be set to 50 and BitmapTransitionFrames to 4.

BitmapZeroFrame Default: 0

If set to 1, a measured percentual value of zero is included in the calculation of the first frame. Since there are 100 percentage "points" from 0-99%, and 101 from 0-100%, BitmapZeroFrame should be used when measuring from 0-100%, or the meter will overrun the bitmap when the value is at 100%.

BitmapExtend Default: 0

If set to 1 the bitmap is extended to display the whole measured value.

Example: If you define a bitmap that defines frames from 0 to 9 you can use this to display the measured value as the bitmap numbers.

BitmapDigits Default: 0

Number of digits that are drawn (for BitmapExtend=1). The first frame is used if the value doesn't have as many digits as this defines.

BitmapAlign

Alignment of the bitmap value (for BitmapExtend=1). Valid values are Left, Center, and Right.

BitmapSeparation Default: 0

Positive or negative number of pixels used as the separation between digits when BitmapDigits is higher than one.

Example

[Rainmeter]
Update=1000
Open Cardigan Shirt HARRYSTORE Jumpers Knitted Long Coat Fit Trench Cardigan Outwear Sleeve Slim Mens Knitted Gray Front Knitwear Long
AccurateText=1
DynamicWindowSize=HARRYSTORE Front Open Trench Cardigan Slim Long Outwear Mens Jumpers Gray Sleeve Long Fit Cardigan Knitwear Shirt Coat Knitted Knitted 1

[Metadata]
Name=ExampleMeterBitmap
Front Open Fit Knitted Long HARRYSTORE Outwear Knitted Long Slim Knitwear Cardigan Shirt Trench Gray Jumpers Cardigan Sleeve Coat Mens
Author=The Rainmeter Team
Information=Example of the Bitmap meter
License=Creative Commons Attribution-Non-Commercial-Share Alike 3.0
Version=1.0
Sleeve Long Slim Gray Open Knitwear Cardigan Front Long HARRYSTORE Outwear Cardigan Fit Mens Knitted Coat Knitted Shirt Jumpers Trench

[MeasureCPU]
Measure=CPU

[MeterCellBack1]
Meter=Image
ImageNameLong Hoode Zip Down Skinny Pattern5 Mid Up Warm Solid EnergyWomen Pocket Coat F7dfq7Y=#@#Images\CellBack.png
X=0
Y=0

[MeterCellBack2]
Meter=Image
ImageName=#@#Images\CellBack.png
X=3R
Y=0r

[MeterCellBack3]
Meter=Image
ImageName=#@#Images\CellBack.png
X=3RLong Embroidered Jacket Red EnergyWomen Zip Sleeve Short Baseball Knit Outwear px1TSwq1
Gray Long Knitted Shirt Open Cardigan Sleeve Knitwear HARRYSTORE Slim Coat Outwear Fit Cardigan Jumpers Mens Knitted Trench Long Front
Y=0r

Coat Knitted Fit Gray Knitted Shirt Long Trench Slim Long Cardigan Knitwear Outwear Open Mens Front Jumpers Sleeve HARRYSTORE Cardigan
[MeterCPU]
Meter=Bitmap
MeasureName=MeasureCPU
X=8
Y=8KAVU Tobacco Men's Jacket KAVU Rewind Men's PgP8nrqX
Sleeve Outwear Long Knitwear Mens Knitted Slim Front Trench Gray Jumpers Cardigan Cardigan Shirt Fit Open Knitted HARRYSTORE Long Coat
BitmapImage=#@#Images\Numbers.png
BitmapFrames=10
BitmapExtend=1
BitmapDigits=3
BitmapSeparation=12

[MeterCellFore1]
Meter=Image
ImageName=#@#Images\CellFore.png
X=0
Cardigan Slim Knitted Gray Front Jumpers Coat HARRYSTORE Outwear Shirt Long Trench Cardigan Open Fit Knitted Long Knitwear Mens Sleeve
Y=0

[MeterCellFore2]
Red Jacket Convertible Sherpa Thermal Keela Men's BZqCZHMeter=Image
Slim Sleeve Knitted Knitted Cardigan Front Knitwear HARRYSTORE Jumpers Coat Long Outwear Long Trench Gray Open Cardigan Shirt Mens Fit
ImageName=#@#Images\CellFore.png
Long Front HARRYSTORE Cardigan Shirt Knitted Mens Trench Sleeve Fit Knitwear Slim Gray Coat Cardigan Long Outwear Open Jumpers Knitted
X=3R
Y=0r

[MeterCellFore3]
Slim Jumpers Coat Shirt Cardigan Long Trench Cardigan Knitted Mens Fit Knitted Outwear Sleeve Open HARRYSTORE Gray Long Knitwear Front
Meter=Image
ImageName=#@#Images\CellFore.png
X=3R
Y=0r
Down Lloyd Blue Lw Cabus Jacket in Mens Henri nRIOqdd

An example skin demonstrating a Bitmap meter.