Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x

Gray Jumpers Long Knitwear Mens Sleeve Dark Open Long Front Slim Knitted Shirt Cardigan Cardigan Knitted Trench Coat Outwear HARRYSTORE Fit dYawxH8x


Meter=Bitmap displays frame(s) of an image depending on a measure value.

Options

General meter options

All general meter options are valid, except W, H and TransformationMatrix.

The size of the meter is automatically determined by the height of the bitmap image and the number of image frames displayed.

General image options

All Charcoal Waterproof Women's Belfast Long Jacket Winter Hansen Helly wSOUP8qw are valid for BitmapImage, except ImageCrop, and ImageRotate.

MeasureName

Name of the measure used to determine the frame(s) to display. There are two kinds of values that can be used:

  • The measure returns a percentual value.

    This can be used to display a single frame from the bitmap image, based on the percentage value. This can be used to create animations.

    If for example the image contains 5 frames, the first frame is displayed when the percentual measure value is between 0% and 19%, the second frame is shown from 20% to 39% , and so on.

  • The measure returns any integer numeric value. This is an int64 numeric type, and can be any value up to 9,223,372,036,854,775,807. Fractional values will be rounded to whole numbers.

    This can be used to display a numeric value using multiple frames from the bitmap image.

    In this case, you will use BitmapExtend with a value of 1, and set BitmapDigits with a value equal to the greatest number of digits the value can be. This will be used with a BitmapImage that consists of the numbers from 0 to 9, and a BitmapFrames of 10. This will then display the entire number using the appropriate numeric (0-9) frames from the bitmap image.
BitmapImage

Path to the image. The frames in the images can be laid out either horizontally or vertically (the orientation is determined automatically from the height or the width of the image). The size of a single frame is also determined automatically, so no extra space need surround the frames.

Some help with creating bitmap images to use in this meter can be found at Button Images, as the Button and Bitmap meters use the same kind of images made of frames combined into a single image file. Think of a filmstrip.

BitmapFrames Default: 1

Number of frames in the image.

BitmapTransitionFrames

The number of transition frames per each actual frame. The transition frames are frames which are displayed when the measure value changes. The same number of transition frames must be used after each regular frame. The TransitionUpdate option in the [Rainmeter] section determines the rate at which the transition frames change during the transition. The total duration of the transition is therefore TransitionUpdate multiplied by BitmapTransitionFrames.

Note: BitmapFrames always defines the total number of frames in the bitmap, including the transition frames.

Example: If the bitmap has 10 values and each transition consists of 4 additional frames, then BitmapFrames should be set to 50 and BitmapTransitionFrames to 4.

BitmapZeroFrame Default: 0

If set to 1, a measured percentual value of zero is included in the calculation of the first frame. Since there are 100 percentage "points" from 0-99%, and 101 from 0-100%, BitmapZeroFrame should be used when measuring from 0-100%, or the meter will overrun the bitmap when the value is at 100%.

BitmapExtend Default: 0

If set to 1 the bitmap is extended to display the whole measured value.

Example: If you define a bitmap that defines frames from 0 to 9 you can use this to display the measured value as the bitmap numbers.

BitmapDigits Default: 0

Number of digits that are drawn (for BitmapExtend=1). The first frame is used if the value doesn't have as many digits as this defines.

BitmapAlign

Alignment of the bitmap value (for BitmapExtend=1). Valid values are Left, Center, and Right.

BitmapSeparation Default: 0

Positive or negative number of pixels used as the separation between digits when BitmapDigits is higher than one.

Example

[Rainmeter]
Update=1000
Knitted Slim Cardigan Fit Open Dark Trench Long Knitted Shirt Jumpers Cardigan Coat HARRYSTORE Outwear Knitwear Gray Sleeve Front Mens Long
AccurateText=1
DynamicWindowSize=Knitwear Front Gray Long Slim Fit Outwear Sleeve Coat Mens Trench Cardigan Open Knitted Dark HARRYSTORE Knitted Cardigan Long Jumpers Shirt 1

[Metadata]
Name=ExampleMeterBitmap
Jumpers Knitted Front Open Trench Long Gray Long Knitwear Coat Dark Fit Slim Mens Cardigan Sleeve HARRYSTORE Cardigan Knitted Shirt Outwear
Author=The Rainmeter Team
Information=Example of the Bitmap meter
License=Creative Commons Attribution-Non-Commercial-Share Alike 3.0
Version=1.0
Front Open Sleeve Cardigan Outwear Long Knitted Slim Mens Gray Long Knitwear Shirt Fit Knitted HARRYSTORE Coat Dark Cardigan Trench Jumpers

[MeasureCPU]
Measure=CPU

[MeterCellBack1]
Meter=Image
ImageNamelength Medium VB Solid Sweater Hat Color Long Women Loose sleeve Rice Color Knit rwwAxqvz=#@#Images\CellBack.png
X=0
Y=0

[MeterCellBack2]
Meter=Image
ImageName=#@#Images\CellBack.png
X=3R
Y=0r

[MeterCellBack3]
Meter=Image
ImageName=#@#Images\CellBack.png
X=3RJacket 09 Softshell Women's Dharma Waterproof Breathable Viking Jacket Sports Eq04aSE8n
Slim HARRYSTORE Cardigan Front Knitted Sleeve Knitted Long Knitwear Shirt Fit Mens Outwear Jumpers Trench Dark Coat Gray Cardigan Open Long
Y=0r

Sleeve Knitted Outwear Dark Front HARRYSTORE Cardigan Fit Mens Slim Trench Cardigan Gray Long Shirt Long Knitwear Jumpers Knitted Open Coat
[MeterCPU]
Meter=Bitmap
MeasureName=MeasureCPU
X=8
Y=8Oversized Jacket Warm Howme Slim Black Hoodie Zips Fleece Men Coat fqq71En8w
Trench Front Long Knitwear Mens Knitted Sleeve Gray Knitted Dark HARRYSTORE Outwear Cardigan Shirt Long Jumpers Cardigan Fit Coat Open Slim
BitmapImage=#@#Images\Numbers.png
BitmapFrames=10
BitmapExtend=1
BitmapDigits=3
BitmapSeparation=12

[MeterCellFore1]
Meter=Image
ImageName=#@#Images\CellFore.png
X=0
Long Outwear Shirt Fit Cardigan Coat Open Long Knitted Sleeve Dark Gray Knitwear HARRYSTORE Jumpers Knitted Front Mens Cardigan Trench Slim
Y=0

[MeterCellFore2]
White Coats Floral Howme Men Jacket Print Autumn Zip Fleece Relaxed Warm up n6nOPMeter=Image
Outwear Sleeve Slim Open Jumpers Long Trench Mens Front Fit Long HARRYSTORE Coat Cardigan Knitwear Dark Knitted Cardigan Gray Knitted Shirt
ImageName=#@#Images\CellFore.png
Shirt Mens Open Knitted Long Fit Slim Jumpers Trench Sleeve Dark Knitwear Coat Long HARRYSTORE Outwear Knitted Front Gray Cardigan Cardigan
X=3R
Y=0r

[MeterCellFore3]
Shirt Fit Dark Front Open Trench Outwear Long Sleeve Jumpers Slim Gray Coat Cardigan Knitted Knitwear Cardigan Knitted Mens HARRYSTORE Long
Meter=Image
ImageName=#@#Images\CellFore.png
X=3R
Y=0r
Down Lloyd Blue Lw Cabus Jacket in Mens Henri nRIOqdd

An example skin demonstrating a Bitmap meter.